Frequently Asked Questions (FAQs)
What can go in my yellow recycling bin?
How do I make sure I recycle right?
Why can’t I put lids in recycling?
"Lids" covers a wide variety of items.
- Sometimes the lid is made of the same plastic as the main container and sometimes not.
- Sometimes the lid is the same colour as the main container and sometimes not.
- Sometimes the lid is quite a big part of the container and sometimes not.
- Sometimes the container has been well cleaned out and the lid replaced, and sometimes not.
Because of these variabilities, to increase the quality of our recycling and to simplify the process of recycling the messaging is no lids – of any kinds.
Often lids are left on a dirty container causing contamination of all other recycling when the lid inevitably falls off during processing - not to mention making it a bad workday for our hard-working recycling sorters. When the plastic items are baled up for reprocessing the smaller lids will often fall out and end up in landfill or causing littering issues.
Other lids are pumps or triggers and possibly contain a mixture of plastic types and metals making them hard to recycle.
Please remove all lids from plastic items 1, 2 and 5 and place in your red rubbish bin – or find some creative reuse for them.
How can I make the most of my recycling?
Check the plastic types in your cupboards and in your supermarket trolley and start making switches to easy-to-recycle products to help reduce waste to landfill.
Look for similar products that are packaged in other recyclable materials like, cans, glass or cardboard.
If you cannot avoid non-recyclable plastics, perhaps reduce how frequently you purchase the item.
What happens to my recycling?
What is Council doing to find a long-term solution?
Change requires a collaborative approach involving councils, producers, manufacturers and the community, with central government as the key enabler.
In 2020, we supported the Local Government Waste Manifesto as a remit at the Local Government New Zealand conference. Since then, central government has put out several key pieces of work, including a draft Waste Strategy, a work strategy for the motu to 2050, and a proposal to introduce a Container Return Scheme (bottle deposits) and to Standardise Kerbside Collection services. CODC has made submissions to support these proposals whilst highlighting the unique challenges for recycling and waste minimisation faced by rural populations without ready access to waste and recycling infrastructure.
Central government has a programme to phase out the use of hard-to-recycle and single-use plastics within Aotearoa New Zealand. The first of these bans came into effect in October 2022. The following items will not be allowed to be imported into or sold within the country:
- PVC food trays and containers for produce, baked goods and meat
- Polystyrene and expanded polystyrene takeaway food and drink packaging
- Plastic with chemical additives designed to physically breakdown, e.g. ox-degradable and photo-degradable plastics
- Plastic drink stirrers
- Plastic stemmed cotton buds
CODC is also working with our neighbouring districts and at a regional level to ensure we work to support the vision of our Waste Management and Minimisation Plan - Towards Zero Waste and a Sustainable Central Otago.
What are the tags under the bin lid?
The white discs present on some kerbside bins are RFID (Radio Frequency Identification) tags. These are not transmitting devices and have no power source. These tags only contain data on the serial number of the bin. They work when a bin is lifted and gets close to a receiver on the kerbside collection truck. The receiver can read this serial number, allowing the truck to identify if the bin being collected is located at the property the bin was assigned to. This can be used to ensure that ratepayers are getting the bin services that they are paying for in their rates. However, at the moment the RFID tags on CODC bins are inactive as we do not use the RFID tag functions.
RFID tags are present on those bins that have been delivered since the start of the new waste contract in July 2023, so are on all 140L red bins and new or replacement 240L yellow, blue, and green bins. Wheelie bin design has become more sophisticated so that as well as a number being stamped into the bin body, which can fade or get scraped off, it is also recorded in the RFID tag. RFID tags are now fitted as standard by the bin manufacturer and are to be found on bins all over the country.
The tags are part of the bin assigned to properties. Any intentional damage or defacement to bins or any part of them could result in a replacement bin charge of $55.
Does the Council have a Waste Management and Minimisation Plan (WMMP)?
Yes, it does.
At the Council meeting on 26 June 2024, the Waste Management and Minimisation Plan 2024-2030 was adopted, following public consultation 4 March to 7 April 2024, regarding Council's role in managing and minimising waste in New Zealand, in 2024.
The Council is required to review their Waste Management and Minimisation Plan (WMMP) every six years and adopt a new plan if necessary.
With the significant changes to the kerbside collection services and the recent standardisation of kerbside recycling as set by Central Government, it was evident that the WMMP no longer reflected the waste management and minimisation requirements for the Central Otago district.
The five key drivers for change included:
- Promoting waste reduction and local circular economy principles.
- Keeping more out of landfill.
- Improving waste services.
- Working with others to reach our shared goals.
- Reducing the impact of waste on our environment.
Forty submissions were received. More information about the consultation and the documents will be available on Let’s Talk.
In approving and adopting the final Waste Management and Minimisation Plan 2024-2030 means Council:
- complies with the Waste Management Act.
- continues to receive Waste Levy funding from the Ministry for the Environment to support waste management and minimisation activities within the Central Otago district.